Description

The Iron Eagle Supply Kickstand Spring offers an effortless replacement for the Harley OEM spring. This replacement Spring features a dual hook swivel design for easy installation. Crafted from high-strength material, this spring securely maintains the kickstand in place, ensuring stability whenever needed. Installation instructions and installation video below.

Kickstand Spring Installation Instructions:

* Make sure to wear eye protection as the Springs hold pressure and may release.
* Safely secure the Motorcycle with the Kickstand Compressed up. (Use a Motorcycle Jack or a Friend to hold the Motorcycle.)
* Locate Kickstand Spring under Motorcycle.
* Remove old spring with kickstand compressed in. Use a Pair of Pliers to move the old Spring from the Pin side.
* Locate Spring Spacers provided in Iron Eagle Supply Spring Kit.
* Use a Vice or Clams to hold down and secure the Spring.
* Bend the Spring to the Left and Right while inserting the Spacers provided.
* Place 3 Spacers on one side of the Spring.
* Then Bend the Spring the opposite direction and place the remainder 3 Spacers. (As seen in Photo Below)
* With All 6 Spacers inserted into the Spring, the Spring will be long enough to install.
* Install New Spring with Spacers still in place.
* With New Spring Installed, Open and decompress the Kickstand.
* The Spring Spacers will fall out of the New Spring.
* Installation complete. Make sure to remove all Spacers from Spring before operating Motorcycle.

Installation Video from: Ramblin’ Chris